Free room planner · furniture layout · floor plan

Measure the room. Sketch it in two minutes. See what fits.

  1. 01MeasureWall lengths and ceiling height. A tape measure is enough.
  2. 02SketchType the lengths or draw the outline. Walls appear to scale.
  3. 03CheckAdd your furniture. Door swings, drawers and walkways are checked as you go.
01 · The furniture library

Every piece brings its own clearance.

A wardrobe needs room for its doors, a desk for the chair, a bed for the walkway beside it. The zones are part of each symbol, so the fit check knows what every piece needs. You never draw them.

72 pieces in the library, plus a custom box of any W × D × H.

  • Wardrobe, hinged doors200 × 60 × 220Door swing · 50 cm
  • Double bed160 × 200 × 45Walkway · 60 cm
  • Chest of drawers100 × 50 × 85Drawers · 45 cm
  • Desk with chair140 × 70 × 75Chair pull-back · 75 cm
  • Sofa, 3-seat220 × 90 × 80Walkway · 45 cm
  • Dining table140 × 80 × 75Chair pull-back · 70 cm
  • Nightstand45 × 40 × 50Drawers · 30 cm
  • Single bed90 × 200 × 45Walkway · 60 cm
02 · Compare layouts

Try the bed on the other wall.

Keep several layouts of the same room. The walls stay shared, the furniture moves, and each layout carries its own fit check and free floor.

  • Layout A

    All clear
    sill 90 cm3.604.202.600.800.203.601.301.401.504.20
    Free floor
    10.36 m² · 69 %
  • Layout B

    All clear
    sill 90 cm3.604.202.600.800.203.601.301.401.504.20
    Free floor
    9.86 m² · 65 %
  • Layout C

    2 issues
    sill 90 cm3.604.202.600.800.203.601.301.401.504.20−45 cm

    No room to pull the chair back — 45 cm short.

    Free floor
    9.38 m² · 62 %
03 · The floor plan

One room at a time, then the whole flat.

Each room is measured and furnished on its own. On the floor plan they snap together, and the fit check starts looking across walls.

01Drag and snapDrag a room up to its neighbour. The walls snap into one 12 cm shared wall, and the doors line up.
04 · Export & share

Hand the carpenter a drawing, not a napkin.

Export a room or the whole flat as a PDF, or a sheet for a single piece: its front elevation, its place in the room and every dimension called out.

  • Full planWalls, furniture, every dimension, scale bar and list
  • Whole flatEvery room on one sheet, with outside dimensions and a room schedule
  • For the carpenterWalls and one piece, with every dimension called out
  • Read-only linkAnyone with the link can view the plan. Nobody can edit it.
For the carpenterBedroom · Layout AA4 · 1:20
Front elevation
5050505020022040260to ceilingplinth 8
Position in the room
sill 90 cm3.604.202.600.800.203.601.301.401.504.20160360
Wardrobe, hinged doors200 × 60 × 220 cm4 hinged doors × 50 cmCheck the ceiling height on site before cutting.
05 · 3D peek
Arrow keys orbit · + and − zoom · 0 resets the view

Look into the room before you move a thing.

The same plan, lifted into 3D with the front walls lowered so you can see in. There is nothing to model: it is built from the walls and furniture already on the plan.

Start with the room you want to change.

You need the wall lengths and, if you have it, the ceiling height.

Runs in the browser on phone, iPad and desktop, and keeps working offline. Nothing to install.